|本期目录/Table of Contents|

[1]柏道远,陈建成,孟德保,等.湖南炎陵印支期隔槽式褶皱形成机制[J].地球科学与环境学报,2006,28(04):10-14.
　BAI Dao-yuan,CHEN Jian-cheng,MENG De-bao,et al.Forming Mechanism of Indosinian Trough-Like Folds in Yanling Region，Hunan[J].Journal of Earth Sciences and Environment,2006,28(04):10-14.
点击复制

湖南炎陵印支期隔槽式褶皱形成机制(PDF)
分享到：

《地球科学与环境学报》[ISSN:1672-6561/CN:61-1423/P]

卷:
第28卷
期数:
2006年第04期
页码:
10-14
栏目:
出版日期:
2006-12-15

文章信息/Info

Title:
Forming Mechanism of Indosinian Trough-Like Folds in Yanling Region，Hunan
作者:
柏道远1; 陈建成2; 孟德保1; 王先辉1;  马铁球1; 张晓阳1; 陈必河1
1.湖南省地质调查研究院,湖南湘潭411100;2.湖南省地质勘查局413队,湖南常德415000
Author(s):
BAI Dao-yuan1; CHEN Jian-cheng2; MENG De-bao1; WANG Xian-hui1 MA Tie-qiu1; ZHANG Xiao-yang1; CHEN Bi-he1
1. Hunan Province Institute of Geology Survey, Xiangtan 411100, Hunan, China; 2. 413 Brigade of Hunan Province Bureau of Geology and Mineral Exploration and Development, Changde 415000, Hunan, China
关键词:
隔槽式褶皱; 厚皮式; 印支期; 炎陵; 湖南
Keywords:
trough-like folds;  thick-skin;  Indosinian;  Yanling;  Hunan
分类号:
P542
DOI:
-
文献标志码:
A
摘要:
为查明湘东南印支期褶皱特征及形成机制,对炎陵地区进行了详细的地质填图和野外观察。调查表明, 泥盆纪跳马涧组与前泥盆纪褶皱基底间不整合界面在空间上组成背、向斜,表明褶皱基底参与了印支期褶皱作用。 平面上,向斜出露宽度及延伸规模明显较背斜小,向斜转折端表现清楚且狭窄尖长,而背斜转折端没有清楚显示; 剖面上,不整合界面靠近向斜核部产状陡,向两翼方向迅速变缓。反映出背斜平缓开阔、向斜紧闭狭窄且侧翼呈上 拱尖棱状的隔槽式褶皱特征。印支期褶皱呈北北东向,横跨在前泥盆纪褶皱基底中加里东期北西向褶皱之上,但 未对加里东期褶皱造成明显地叠加改造效应,说明前泥盆纪地层在印支运动中没有发生明显地弯滑褶皱作用。露 头显示,褶皱过程中盖层未沿不整合界面产生明显滑脱。因此,认为炎陵地区隔槽式褶皱形成于基底(厚皮式)横 向收缩与压扁作用,并从理论上论证了其隔槽式褶皱不可能是盖层沿基底滑脱的产物,纠正了前人的薄皮式观点。
Abstract:
This paper carried out regional geological survey in Yanling area in order to study the characteristics and form- ing mechanism of the Indosinian folds in southeast Hunan. The survey declared that the uncomformity surface between Devonian Tiaomajian Formation and Predevonian basement make up anticlines and synclines, which indicate that the fol- ded basement participated in Indosinian folding. On surface, the synclines have less width and less extending size than the anticlines; the hinge ends of synclines are clear, narrow and sharp, while the hinge ends of anticlines aren’t distinct. At section plane, the uncomformity surface is steep near the syncline core, and become gentle toward two limbs. Above features show pattern of trough like folds with gentle and wide anticlines as well and narrow close clinoriums. The NNE- directed Indosinian folds stride across the Caledonian NW-directed folds in the predevonian basement, and didn’ t trans- form the Caledonian folds evidently. Outcrops show that the cover did not detach along the uncomformity surface. The trough like folds in Yanling region were formed during the transverse shrinking and flattening of the basement(thick- skin), the trough like folds were not the production of cover detachment along basement, so the former standpoint of thin skin about it was corrected.

参考文献/References:

[1] 傅昭仁，李紫金，郑大瑜. 湘赣 边区 NNE 向走滑造 山带构 造发展样式[J] . 地学前缘, 1999，6(4):263 272.
[2] 朱志澄，宋鸿 林. 构造地 质学[M] . 北京 :中国 地质大 学出 版社，1990.
[3] 柏道远，黄建中，刘耀荣，等. 湘东 南及湘粤赣边区 中生代 地质构造发 展 框架 的厘 定[J] . 中 国地 质，2005，32(4): 557 570.
[4] 湖南省地质矿产局. 湖南省区 域地质志[M] . 北 京 :地质出 版社，1988.
[5] 湖南省地质矿产局. 湖南省岩石地层[M] . 武汉 :中国地质 大学出版社，1997.
[6] 庄锦良，刘钟伟，谭必祥. 湘南地 区小岩体 与成矿关 系及隐 伏矿床预测[J] . 湖南地质, 1988(增刊 4):1 98.
[7] 童潜明，李荣清，张建新. 郴临深大断裂带及其 两侧的矿床 成矿系列[J] . 华南地质与矿产，2000(3):34 41.
[8] 童潜明，李荣清，张建新. 郴临深大断裂带及其 两侧的岩浆 岩特征[J] . 华南地质与矿产，2000(3):8 16.
[9] 李荣清，童潜明，张建新. 郴临深大断裂带及其 两侧矿床的 物质组分特征[J] . 华南地质与矿产，2000(3):25 33.
[10] 张建新，童潜明，李荣清. 郴临深大断裂带及其 两侧的地球 化学特征[J] . 华南地质与矿产，2000(3):17 24.
[11] 李扬鉴，赵宝金. 论褶皱系和挤压型盆地逆冲断层的成因机 制[J] . 西安地质学院学报, 1988，10(2):56 62.

相似文献/References:

[1]刘重庆,周建勋,郎建,等.多层滑脱条件下褶皱-冲断带形成制约因素研究:以川东—雪峰构造带为例[J].地球科学与环境学报,2013,35(02):45.
　LIU Chong-qing,ZHOU Jian-xun,LANG Jian.Study on Restrictive Factor of Fold-thrust Belt Formation with Multiple Decollements:Taking Eastern Sichuan-Xuefeng Tectonic Belt as an Example[J].Journal of Earth Sciences and Environment,2013,35(04):45.

备注/Memo

备注/Memo:
[收稿日期]2005-12-15
[基金项目]国土资源部地质大调查项目(200213000035)
[作者简介]柏道远(1967-),男,湖南澧县人,高级工程师,从事区域地质调查工作。
更新日期/Last Update: 2006-12-20